90 Degree Transmission nmrv Worm Right Angle Spiral Bevel 250cc ATV 300cc UTV Reverse Gearbox 2hp 20hp 700p

Overview

Quick Details

Place of Origin:

Zhejiang, China

Brand Name:

EPT

Model Number:

1:16, 16: 1, 12: 1, 10: 1

Rated Power:

11/12/15KW

Gearing Arrangement:

Bevel / Miter

Output Torque:

800/900NM

Input Speed:

1500min

Output Speed:

14-280rpm

Certificate:

CCC CE ISO SGS

Material:

High-strength aluminium alloy

Power:

11/12/15KW

Type:

reducer for construction lift building hoist

Weight:

51kg

Color:

According to your requirements

Ratio:

10,15,20,25,30,40,50,60

Featurer:

construction lift building hoist usage

Name:

Worm Right Angle Spiral Bevel 250cc ATV 300cc UTV Reverse Gearbox

Supply Ability

Supply Ability:
10000 Set/Sets per Month transmission gearbox

Packaging & Delivery

Packaging Details
Wooden case – 90 Degree Transmission nmrv Worm Right Angle Spiral Bevel 250cc ATV 300cc UTV Reverse Gearbox 2hp 20hp 700p
Port
Shanghai
Lead Time
:
about 7-15 days after receiving T/Tpayment

Online Customization

90 Degree Transmission nmrv Worm Right Angle Spiral Bevel 250cc ATV 300cc UTV Reverse Gearbox 2hp 20hp 700p

Product Overviews

Product Description

A.The features of 90 Degree Transmission nmrv Worm Right Angle Spiral Bevel 250cc ATV 300cc UTV Reverse Gearbox 2hp 20hp 700p

  1. The reducers have the following features because of using plane enveloping worm gear as compared with other kinds of worm transmissions: larger loading capactiy and compact dimension and higher efficiency and smoother and quieter functioning longer service life.
  2. In addition, the housings of these series reducers are made of high-strenghth aluminium alloy. So the reducers make the features of higher strength and lighter weight.
  3. It is recommended to utilize the viscosity VG320 synthetic worm gear oil (or synthetic gear oil) for lubrication. Once the environment temperature is higher than 30°C, it is recommended to utilize the viscosity VG460 synthetic worm gear oil(or synthetic gear oil) for lubrication. And allowed maximum working oil temperature is 100°C.
Number Weight Transmission Ratio

Center Distance

(mm)

Output power

(KW)

Ordering instruction
1 50Kg 1:16 125 11.6

Please specify

transmissionratio and type

when ordering

2 1:18 125 10.3
3 1:14 125 11.72

B.Installation

  1. The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
  2. The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
  3. The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
  4. Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
  5. While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
  6. When ordering or using all kinds of WPD type, if the motor weight is bigger than the common,supporting set is required.

Speed ratio

(I)

Center Distance

(mm)

Input Speed

(r/min)

Input Power

(Kw)

Rated output Torque

(N.M)

TransmissionEfficiency

(%)

14 125 1500 11.2 1128 89
1000 9.919 1276 87.4
16 125 1500 11.06 1136 88
1000 9.651 1417 87.5
20 144 1500 13 1942 86.5
1000 11.52 2512 85.4
25 125 1500 13 2166 84
1000 11.4 2650 83

C.Usage

  1. Before using,please check carefully whether the reducer modle, distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required.
  2. According to the requirement of selecting lubricant oil in the product manual. Please fill proper category and brand lubricant.And then screw on the vent-plug, unlock the small cone-plug of vent-plug.Only after doing these, reducer is already for startinh up running.The proper brand and adequate lubricant oil is required, replacing oil in time conforming to the request of product manual is also necessary, especially after using first 100hours, it is required refilling new oil.
  3. When abnormal circumstances occur, please stop and check reducer per solutions and reasons for faults of reducer(allowable highest oil temperature is 95, under this temperature limit, if oil temperature no more goes up, please let reducer continue running).

Production Flow

Our Services

Customized Parts Solutions

Ruibiao specialize in design, custom and manufacture electric motors,includingrack and pinion,Suspended platform,electric motor,Gearbox,safety device,elevator Overload Sensor,winch,cable,Limit Switch,worm gear.All of them can befully and easily customized (see some of the many customization options listed below). We committed to offer high quality, high performance, cost effective optionstomeet customersspecific demands.Choosing to customize one ofthe construction hoist spare partsin our Product Categories now!

Favorable Comments

FAQ

90 Degree Transmission nmrv Worm Right Angle Spiral Bevel 250cc ATV 300cc UTV Reverse Gearbox 2hp 20hp 700p