China OEM Made in China Gearbox Manual Override Declutchable Gear for Pneumatic Actuator car gearbox

Product Description

Description

 

HDM De-clutchable wormgear offers simple and reliable manual positioning of the valves, dampers and other quarter-turn devices when overriding existing pneumatic, electric or hydraulic quarter-turn actuators. All unit are suitable for both indoor and outdoor installation. The modular design is to provide the most efficient and effective solution to a full range of manual overriding requirements.

Main Product features
 

To engage manual operation, first pull out the lock handle and then rotate the clutch lever in anti-clockwise direction until engagement takes place. To return to automatic mode, first pull out the lock handle and then rotate the clutch lever in clockwise.

Remark:The bottom center of the HDM-4 is either F10/F14 or F10/F12

 

 

New Manual Override Countershaft Valve Connection Actuator Connection
b1 N b2 M D1 4-M1 D2 4-M2 E D3 4-Φ1 D4 4-Φ2
HDM-1 14 22 14 16 Φ50 4-M6 Φ70 4-M8 70*70 Φ50 4-Φ6.5 Φ70 4-Φ8.5
HDM-2 17 22 17 18 Φ70 4-M8 Φ102 4-M10 95*95 Φ70 4-Φ8.5 Φ102 4-Φ10.5
HDM-3 22 28 22 22 Φ102 4-M10 Φ125 4-M12 114*114 Φ102 4-Φ10.5 Φ125 4-Φ12.5
HDM-4 27 32 27 30 Φ102 4-M10 Φ125 4-M12 129*129 Φ125 4-Φ12.5 Φ140 4-Φ16.5
HDM-5 36 45 36 38 Φ140 4-M16 / / 156*156 Φ140 4-Φ17 Φ165 4-Φ21
HDM-6 46 50 46 48 Φ165 4-M20 / / 160*160 Φ165 4-Φ22 / /

New Manual Override A B ΦC F T Y H S K Ratio Rated Input Rated Onput
HDM-1 90 55 Φ88 115 44 145 120 53 10 26:1 Nm 250Nm
HDM-2 125 64 Φ110 135 62.5 178 133 56.5 13 28:1 Nm 450Nm
HDM-3 140 71 Φ129 166 70 212 180 68.7 12.5 38:1 Nm 700Nm
HDM-4 188.5 93 Φ174 202 94 280 195 84 15 54:1 Nm 1200Nm
HDM-5 222 110 Φ205 245 110 315 225 92 15 80:1 Nm 2000Nm
HDM-6 252 120 Φ275 280 125 320 252 102 15 78:1 Nm 3000Nm

1. Question:What is your main products?

   Answer:Our main products are Pneumatic Actuators, Electric Actuators, Actuated Valves And Valve actuators Accessories..
 

2. Question:Are you a trader or manufacturer ?

   Answer: We are the pneumatic actuators and electric actuators manufacturer , we have ability to do the customization products with experienced team, And we have own factory and production line.
 

3. Question:How do your make the quality guarantee for actuators?

   Answer:We have our own quality control system for incoming and outgoing of the materials, every product will be under controlled and tested before delivery to our customer , and we also provide 18 months guarantee ,beside we provide technical supporting .

4.  Question:When can I receive the Price of valve actuators ?

   Answer:We will give the Quotation Within 24 hours after we get your inquiry .Or Your can call or message us if it’s quite urgently.
 

5. Question:How to order our pneumatic actuators and electric actuators ?

   Answer:Please send us your inquiry by Email, , etc. we need to know the following informations before giving the formal Quotation.
1) Product information in details, Quantity, Other requirements
2) Delivery time required
 

6. Question:How can I get a sample to check your quality?

   Answer:Contact with our sales expert to arrange the sample delivery. Please send us the details of the sample before placing the order.
 

7. Question:Shall we pay the sample cost and transportation cost ?

   Answer:We will provide the sample by free of charge. Your will bear the freight cost.
 

8. Question:How long to prepare the sample ?

   Answer:Most of our products are under regular production and some of them we keep in stocks.
 

9. Question:How to delivery the sample to our place?

   Answer:Your can provide your forwarders contacts if any, or we will arrange it for you.
 

10. Question:What about the delivery date if we place the formal order ?

   Answer:Usually it takes 15~20days on the production .We know that on-time delivery is very crucial to our customers to meet dead-lines.
We monitor and expedite our supply chain to ensure that we delivery our products to our customers on-time all the time. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor
Function: Change Drive Direction, Speed Changing
Layout: Coaxial
Hardness: Soft Tooth Surface
Installation: Torque Arm Type
Step: Double-Step
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

worm gearbox

Calculating Gear Ratio in a Worm Reducer

The gear ratio in a worm reducer is determined by the number of teeth on the worm wheel (also known as the worm gear) and the number of threads on the worm shaft. The gear ratio formula for a worm reducer is:

Gear Ratio = Number of Teeth on Worm Wheel / Number of Threads on Worm Shaft

For example, if the worm wheel has 60 teeth and the worm shaft has a single thread, the gear ratio would be 60:1.

It’s important to note that worm reducers have an inherent self-locking property due to the angle of the worm threads. As a result, the gear ratio also affects the mechanical advantage and the system’s ability to resist backdriving.

When calculating the gear ratio, ensure that the worm reducer is properly designed and that the gear ratio aligns with the desired mechanical characteristics for your application. Additionally, consider factors such as efficiency, load capacity, and speed limitations when selecting a gear ratio for a worm reducer.

worm gearbox

How to Calculate the Input and Output Speeds of a Worm Gearbox?

Calculating the input and output speeds of a worm gearbox involves understanding the gear ratio and the principles of gear reduction. Here’s how you can calculate these speeds:

  • Input Speed: The input speed (N1) is the speed of the driving gear, which is the worm gear in this case. It is usually provided by the manufacturer or can be measured directly.
  • Output Speed: The output speed (N2) is the speed of the driven gear, which is the worm wheel. To calculate the output speed, use the formula:

    N2 = N1 / (Z1 * i)

Where:
N2 = Output speed (rpm)
N1 = Input speed (rpm)
Z1 = Number of teeth on the worm gear
i = Gear ratio (ratio of the number of teeth on the worm gear to the number of threads on the worm)

It’s important to note that worm gearboxes are designed for gear reduction, which means that the output speed is lower than the input speed. Additionally, the efficiency of the gearbox, friction, and other factors can affect the actual output speed. Calculating the input and output speeds is crucial for understanding the performance and capabilities of the worm gearbox in a specific application.

worm gearbox

Advantages of Using a Worm Reducer in Mechanical Systems

Worm reducers offer several advantages that make them suitable for various mechanical systems:

  • High Gear Reduction Ratio: Worm gearboxes provide significant speed reduction, making them ideal for applications that require a high gear reduction ratio without the need for multiple gears.
  • Compact Design: Worm reducers have a compact and space-saving design, allowing them to be used in applications with limited space.
  • Self-Locking: Worm gearboxes exhibit self-locking properties, which means that the worm screw can prevent the worm wheel from reversing its motion. This is beneficial for applications where the gearbox needs to hold a load in place without external braking mechanisms.
  • Smooth and Quiet Operation: Worm gearboxes operate with a sliding motion between the teeth, resulting in smoother and quieter operation compared to some other types of gearboxes.
  • High Torque Transmission: Worm gearboxes can transmit high torque levels, making them suitable for applications that require powerful torque output.
  • Heat Dissipation: The sliding action between the worm screw and the worm wheel contributes to heat dissipation, which can be advantageous in applications that generate heat during operation.
  • Stable Performance: Worm reducers offer stable and reliable performance, making them suitable for continuous operation in various industrial and mechanical systems.

Despite these advantages, it’s important to note that worm gearboxes also have limitations, such as lower efficiency compared to other gear types due to the sliding motion and potential for higher heat generation. Therefore, selecting the appropriate type of gearbox depends on the specific requirements and constraints of the application.

China OEM Made in China Gearbox Manual Override Declutchable Gear for Pneumatic Actuator   car gearbox	China OEM Made in China Gearbox Manual Override Declutchable Gear for Pneumatic Actuator   car gearbox
editor by CX 2024-04-04

Recent Posts

china worm reducer

As one of leading china worm reducer manufacturers, suppliers and exporters of mechanical products, We offer china worm reducer and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of china worm reducer