Materials Managing Energy UNIT two
This energy unit features power up gravity down circuit. Activate the commence solenoid to start the motor to lift the machine. The lowing motion is activated through the solenoid valve together with the lowering speed controlled through the stress compensated flow manage valve. Products of this series may be extensively utilized in the sector of logistic devices such as fork lift, mini lift table, etc.
1. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean each of the hydraulic elements concerned ahead of mounting the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which should really also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
four. Oil altering is required just after the preliminary 100 operation hrs,afterwards as soon as each and every 3000 hours.
5. The electrical power unit must be mounted horizontally.
Material Dealing with Electrical power UNIT 1
This power unit is intended for that fork lift market, consisting of highly efficient gear pump, DC motor, guide raise and lower valve, tank, ect. The up and down motion are controlled from the lever with the guide release valve, and that is outfitted with an electric switch to activate the motor. The lowing pace is managed through the strain compensated movement manage valve.
1. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean each of the hydraulic components concerned prior to installation of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which should also be clean and free of impurities, N46 hydraulic oil is encouraged .
four. Oil transforming is required right after the preliminary 100 operation hrs, afterwards once just about every 3000 hrs.
5. The power unit proven is designed to be mounted horizontally.