Right Position Miter Gearbox Standard Features
Dimensions: right position miter gear drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile metal. Any shaft can be utilized as a drive.
Gears: Hardened directly miter gears
Bearings: Hardened metal ball bearings, long lasting lubrication
Mounting: Three shaft installation positions provide versatility in application
Versatile: 3 shaft connections are provided for versatility in application
RAB-1 may be operated CW, CCW or Back again driven
RAB-1 is rated at 1/3 HP at 1800 RPM. Maximum acceleration is 3000 RPM
Benefits and Cost Savings
Longer service life
Greater tooth-to-tooth contact
The most effective power transfer design under rated load conditions
Stainless steel shaft (Please specify series stainless required)
Longer shafts lengths upon input and output
Right Position Drives Made with Advanced Quality Construction
Ever-Power 2-Way Right Position Gearboxes transmit power with noiseless, dependable spiral bevel gears. These high quality bevel gearmotors feature hardened spiral bevel gears and non-magnetic stainless-steel shafts. Our Two-Way 90° Gearboxes are also compact and feature multiple mounting options. The fully enclosed style ensures the integrity of the internal gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Right Angle 2-Method Gearboxes are created for maximum strength and heat dissipation. The drives are available with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We can quote several exclusive types of shafts as well, including:
Two Way 90 Degree Gearbox Applications
Ever-Power Right Angle Miter Gearboxes are used throughout dozens of industries in hundreds of applications. Any make use of that demands the dependable transfer of quickness or power, you could look for a two-method gearbox bearing the Ever-Power brand. The small design of Ever-Power Two-Way Right-Angle Gearboxes makes them perfect for applications such as for example:
Food Processing Equipment
Ovens & Dryers
Power Transmission Equipment
Ever-Power Inc, offering the most reliable and reliable transfer of power in the marketplace. Our company is well known for its innovative styles and producing high-quality movement control solutions made for engineered overall performance and durability. We provide a range of gearbox designs and a wide selection of versatile shaft couplings to supply you with a complete solutions for your mechanical and power transmitting applications.
Right Angle Gearbox
Correct angle gearboxes are characterized by the fact that the drive shaft and the result shaft are organized at an angle of 90 degrees. According to the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results in an axis offset.
Correct angle gearboxes are recognized with different types of gear teeth or a mixture of different gearing types. The most famous single-stage gearbox types are bevel and worm.
Due to the high solitary stage ratios and the reduced efficiency level, worm gears can perform a self-locking impact. With worm gears additionally it is possible to have a hollow shaft as the drive shaft.
Bevel gearboxes come with various kinds of gearing. Bevel gearboxes with intersecting axes are understood using bevel gearing with straight, helical or spiral teeth. Hypoid gearboxes have helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically practical ratios with which the bevel gear stage can be realized is bigger with hypoid gearboxes than with the classical bevel gear teeth.
Bevel gearboxes may also be combined with various other gearbox types. A frequent software in this respect may be the combination with a planetary gearbox, whereby the planetary gearbox can be linked upstream or downstream. This results in a wide range of overall multiplication factors and wide range of uses in many industrial applications.
The efficiency level of bevel gearboxes is normally less than that of coaxial spur gearboxes, particularly compared to planetary gearboxes. That is because the bevel equipment stage generates a higher degree of axial force and radial force, which has to be absorbed by appropriate bearings. This escalates the power reduction, which is particularly significant in the drive stage of the gearbox.
The operating noise and the transmittable torques of classic bevel gearboxes are also lower than with single spur gear teeth. Hypoid gearboxes, however, are extremely noisy and can transmit large amounts of torque, but a considerable amount of bearing load occurs in the bevel gear stage of the gearboxes.
In summarizing, the right angle gearbox is usually used when the amount of installation space in the application form is limited, or an angular arrangement between your drive and the output is required by the application. Also, they are used in cases where in fact the input shaft needs to be hollow in order to lead through lines or use clamping sets.
The advantages of right angle gearboxes:
Use when set up space is limited
Can be combined with other types of gearbox
Quiet and high amount of torque when working with hypoid gearboxes
Edition with hollow shaft possible
The disadvantages of right angle gearboxes:
Lower efficiency level than planetary gearbox
Reduce torques in single-stage ratio range
The Ever-Power, the initial right angle gearbox drive, is more popular and is used worldwide. The Ever-Power provides manual or power transmission of rotary motion in a concise, standardized right angle device.
Our standard line of bevel gearboxes are available from share in both an ” and Metric Series, one or dual output shafts, 1:1 or 2 2:1 ratios, and grease lubricated for life and have an operating temperature range of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Utilizing carburized case-hardened Coniflex* bevel gears, all Ever-Power units employ completely enclosed & sealed ball bearings.
The cast aluminum housings upon our 90 degree gearboxes are precision machined, on our CNC machining center and then coated with a chemical film to protect the material, and use flanged ends and side bosses for compact installation in a wide variety of applications.
The shaft material used for sizes 1, 2 and 3 is #416 stainless. On the two 2:1 models, the pinion shaft is carbon metal. For the sizes 4 & 5, the material is black oxide carbon steel. Shafts can be given special extensions (with flats, splines, holes, etc.) and /or specific lengths upon request.
In addition to our standard models, we will modify our units to meet up your design specifications! Our product sales and engineering departments are ready to help you together with your specific application requirements.
Through the years we’ve received questions about almost every aspect of the gearbox selection procedure. One of the questions we’ve had a few times is, “What is a right-position gearbox or a right-angle drive?” Or, more particularly, “How is definitely a right-position gearbox or drive not the same as a quickness reducer or other types of gearboxes?”
First, let’s start with some fundamental terminology. It isn’t uncommon for the conditions “gearbox”, “drive” and “speed reducer” to be used interchangeably.
A gearbox is any device that runs on the gear teach to transmit torque/rpm and whatever uses a equipment to transmit torque/rpm is a gearbox.
A right-angle drive is a mechanism with a gear train that can transmit torque/rpm 90 degrees, to carefully turn a corner
A equipment reducer is a system with a gear teach that may reduce rpm output. A result of decreasing rpm is increasing torque at the same ratio rate is reduced.
A gear box can also be a speed increaser
The type of gear used in the gear box defines it as a right angle or an inline drive.
A worm equipment drive is a right-angle drive because is a bevel gear
A spur gear drive is inline
A helical equipment is inline but may also be a right-angle drive
So, what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in direction of the shaft. It’s rather a 1 to 1 1 ratio or a multiple of just one 1 such as for example 2:1 or 15:1. If the ratio is 1:1 it really is a right-position drive. If the ratio is certainly greater than 1:1 it really is a right-angle acceleration reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outside contaminants for smooth operation
Right- or left-hand rotation to convert power either direction
Very easily slides axially along the drive or driven shaft for flexible positioning
Alloy steel helical gears for high performance
Built-in 5 sizes with three types of result shaft : hollow, projecting or double-extended. Moreover, an additional output shaft can be installed opposing to the insight shaft.
Three input types can be found : with projecting input shaft, with pre-designed motor coupling (bell and joint) and pre-engineered Small motor coupling.
Gear device body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined upon all surfaces for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all the internal components.
The mechanism of these gearboxes contains two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 made of steel.
The use of high quality bearings on all the axis ensures extended life to the gearbox and allows very high radial and axial loads.
Gearbox housing, flanges, bells and covers are externally painted with BLUE RAL 5010.
Right Position Miter Gearbox Standard Features