Tag Archives: extension shaft

China Nrv Aluminium Worm Gearbox with Extension Shaft with Best Sales

Solution Description

Nrv Aluminium Worm Gearbox with Extension Shaft

NMRV 571-150 worm gear box with flange and electric motor
NMRV+NMRV Double Phase Arrangement Reduction Gear Box
RV Collection Worm Gearbox
worm pace reducer
nmrv worm equipment motor

RV Collection
Including RV / NMRV / NRV.
Principal Characteristic of RV Sequence Worm Gearbox
RV collection worm gear reducer is a new-era product developed by CZPT on the basis of perfecting WJ series merchandise with a compromise of advanced engineering equally at home and overseas.
1. Higher-high quality aluminum alloy, light-weight in excess weight and non-rusting.
two. Huge in output torque.
3. Sleek managing and reduced sound,tough in dreadful situations.
four. Substantial radiation efficiency.
5. Good-searching visual appeal, tough in service existence and small volume.
six. Ideal for omnibearing installation.
Primary Supplies of RV Sequence Worm Gearbox
1. Housing: die-forged aluminum alloy(body dimension: 571 to 090), cast iron(frame dimension: 110 to 150).
two. Worm: 20Crm, carbonization quencher warmth treatment helps make the floor hardness of worm gears up to 56-sixty two HRX, retain carbonization layer’s thickness among .3 and .5mm following precise grinding.
3. Worm Wheel: wearable stannum bronze alloy.

SPEED RATIO seven.5~a hundred
OUTPUT TORQUE <1050NM
IN POWER .09-11KW
MOUNTING TYPE FOOT-MOUNTED FLANGE-MOUNTED

 

When functioning, great load potential, secure operating, minimal sound with  large efficiency.
  Gear Box’s Usage Area
one Metallurgy       eleven Agitator  
2 Mine       twelve Rotary weeder  
three Machine       13 Metallurgy   
four Power       14 Compressor
five Transmission     15 Petroleum market
6 Water Conserbancy     sixteen Air Compressor
seven Tomacco       seventeen Crusher  
eight Medical       eighteen Materials
nine Packing     19 Electronics  
10 Chemical sector     20 Textile indutry
           
Power .06kw .09kw .12kw .18kw .25kw .37kw .55kw
.75kw one.1kw one.5kw two.2kw 3kw 4kw five.5kw
seven.5kw 11kw 15kw        
Torque 2.6N.m-3000N.m
Ratio 7.5-100, the double gearbox is  more
Shade Blue, Silver or as customers’ require
Material Iron or Aluminium
Packing Carton with Plywood  Case or as clients’ requirement
Kind RV571 RV030 RV040 RV050 RV063 RV075 RV090
Weight .7kg one.3kg two.3kg three.5kg six.2kg 9kg 13kg
Sort RV110 RV130 RV150        
Fat 35kg 60kg 84kg        
Mounting Techniques Foot Installation   Flange Set up
For various  mortor or double input/output shafts can be outfitted

Item image:

Composition:

Certification:

Packing & Shipping:

Our organization :
AOKMAN was started in 1982, which has a lot more than 36 a long time in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can provide the suitable solution for uncountable apps. Our items are commonly employed in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcoholic beverages market place and different other sorts of devices with a strong existence in the intercontinental market.
AOKMAN has turn into a reliable provider, CZPT to supply substantial high quality gearboxes.With 36 several years experience, we guarantee you the utmost reliability and security for each solution and solutions.

Buyer checking out:

FAQ:
1.Q:What varieties of gearbox can you make for us?
A:Principal items of our organization: UDL collection pace variator,RV series worm equipment reducer, ATA collection shaft mounted gearbox, X,B sequence gear reducer,
P sequence planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and countless numbers of specifications
two.Q:Can you make as for every personalized drawing?
A: Indeed, we supply customized support for customers.
3.Q:What is your phrases of payment ?
A: 30% Progress payment by T/T following signing the deal.70% just before shipping
4.Q:What is your MOQ?
A: 1 Set
Speak to:

Welcome you contace me if you are interested in our product.
Our crew will assistance any need you may possibly have.

US $30-500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industry
Layout: Orthogonal
Hardness: Hardened
Installation: Horizontal Type
Step: Single-Step
Type: Worm and Wormwheel

###

Customization:

###

SPEED RATIO 7.5~100
OUTPUT TORQUE <1050NM
IN POWER 0.09-11KW
MOUNTING TYPE FOOT-MOUNTED FLANGE-MOUNTED

###

When working, great load capacity, stable running, low noise with  high efficiency.
  Gear Box’s Usage Field
1 Metallurgy       11 Agitator  
2 Mine       12 Rotary weeder  
3 Machine       13 Metallurgy   
4 Energy       14 Compressor
5 Transmission     15 Petroleum industry
6 Water Conserbancy     16 Air Compressor
7 Tomacco       17 Crusher  
8 Medical       18 Materials
9 Packing     19 Electronics  
10 Chemical industry     20 Textile indutry
           
Power 0.06kw 0.09kw 0.12kw 0.18kw 0.25kw 0.37kw 0.55kw
0.75kw 1.1kw 1.5kw 2.2kw 3kw 4kw 5.5kw
7.5kw 11kw 15kw        
Torque 2.6N.m-3000N.m
Ratio 7.5-100, the double gearbox is  more
Color Blue, Silver or as customers’ need
Material Iron or Aluminium
Packing Carton with Plywood  Case or as clients’ requirement
Type RV025 RV030 RV040 RV050 RV063 RV075 RV090
Weight 0.7kg 1.3kg 2.3kg 3.5kg 6.2kg 9kg 13kg
Type RV110 RV130 RV150        
Weight 35kg 60kg 84kg        
Mounting Methods Foot Installation   Flange Installation
For various  mortor or double input/output shafts can be equipped
US $30-500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industry
Layout: Orthogonal
Hardness: Hardened
Installation: Horizontal Type
Step: Single-Step
Type: Worm and Wormwheel

###

Customization:

###

SPEED RATIO 7.5~100
OUTPUT TORQUE <1050NM
IN POWER 0.09-11KW
MOUNTING TYPE FOOT-MOUNTED FLANGE-MOUNTED

###

When working, great load capacity, stable running, low noise with  high efficiency.
  Gear Box’s Usage Field
1 Metallurgy       11 Agitator  
2 Mine       12 Rotary weeder  
3 Machine       13 Metallurgy   
4 Energy       14 Compressor
5 Transmission     15 Petroleum industry
6 Water Conserbancy     16 Air Compressor
7 Tomacco       17 Crusher  
8 Medical       18 Materials
9 Packing     19 Electronics  
10 Chemical industry     20 Textile indutry
           
Power 0.06kw 0.09kw 0.12kw 0.18kw 0.25kw 0.37kw 0.55kw
0.75kw 1.1kw 1.5kw 2.2kw 3kw 4kw 5.5kw
7.5kw 11kw 15kw        
Torque 2.6N.m-3000N.m
Ratio 7.5-100, the double gearbox is  more
Color Blue, Silver or as customers’ need
Material Iron or Aluminium
Packing Carton with Plywood  Case or as clients’ requirement
Type RV025 RV030 RV040 RV050 RV063 RV075 RV090
Weight 0.7kg 1.3kg 2.3kg 3.5kg 6.2kg 9kg 13kg
Type RV110 RV130 RV150        
Weight 35kg 60kg 84kg        
Mounting Methods Foot Installation   Flange Installation
For various  mortor or double input/output shafts can be equipped

Worm gear reducer gearbox

A worm gear reducer gearbox is a gear reducer gearbox that uses a worm gear train to reduce the required force. Unlike traditional gear reducer gearboxes, these units are small and require low horsepower ratings. This reduces their efficiency, but their low cost and compact design help make up for this shortcoming. However, these gear reducer gearboxes have some drawbacks, including their tendency to lock up when reversing.
worm reducer

high efficiency

High-efficiency worm reducer gearboxes are ideal for applications where high performance, repeatability, and accuracy are critical. It consists of an input hypoid gear and an output hypoid bevel gear. The input worm rotates perpendicular to the output worm, so for every revolution of the input worm, the output gear makes one revolution. This arrangement reduces friction (another source of energy loss) in a high-efficiency worm gear to at least two arc minutes.
Compared with worm gear reducer gearboxes, hypoid gearmotors offer several advantages, including lower operating costs and higher efficiency. For example, hypoid gear motors can transmit more torque even at high reduction ratios. Also, they are more efficient than worm gear reducer gearboxes, which means they can produce the same output with a smaller motor.
In recent years, the efficiency of worm gear reducer gearboxes has been dramatically improved. Manufacturers have made great strides in materials, design, and manufacturing. New designs, including dual-enveloping worm gear reducer gearboxes, increase efficiency by 3 to 8 percent. These improvements were made possible through countless hours of testing and development. Worm gear reducer gearboxes also offer lower initial costs and higher overload capability than competing systems.
Worm gear reducer gearboxes are popular because they provide maximum reduction in a small package. Their compact size makes them ideal for low to medium-horsepower applications and they are reticent. They also offer higher torque output and better shock load tolerance. Finally, they are an economical option to reduce the device’s power requirements.

low noise

Low-noise worm gear reducer gearboxes are designed to reduce noise in industrial applications. This type of reducer gearbox uses fewer bearings and can work in various mounting positions. Typically, a worm reducer gearbox is a single-stage unit with only one shaft and one gear. Since there is only one gear, the noise level of the worm gear reducer gearbox will be lower than other types.
A worm gear reducer gearbox can be integrated into the electric power steering system to reduce noise. Worm reducer gearboxes can be made and from many different materials. The following three-stage process will explain the components of a low-noise worm reducer gearbox.
Worm gear reducer gearboxes can be mounted at a 90-degree angle to the input worm shaft and are available with various types of hollow or solid output shafts. These reducer gearboxes are especially beneficial for applications where noise reduction is essential. They also have fewer parts and are smaller than other types of reducer gearboxes, making them easier to install.
Worm gear reducer gearboxes are available from various manufacturers. Due to their widespread availability, gear manufacturers maintain extensive inventories of these reducer gearboxes. The worm gear ratio is standard, and the size of the worm gear reducer gearbox is universal. Also, worm gear reducer gearboxes do not need to be sized for a specific purpose, unlike other load interruptions.
worm reducer

pocket

A worm gear reducer gearbox is a transmission mechanism with a compact structure, large transmission ratio, and self-locking function under certain conditions. The worm gear reducer gearbox series products are designed with American technology and have the characteristics of stable transmission, strong bearing capacity, low noise, and compact structure. In addition, these products can provide a wide range of power supplies. However, these worm reducer gearboxes are prone to leaks, usually caused by design flaws.
Worm gear reducer gearboxes are available in single-stage and double-stage. The first type consists of an oil tank that houses the worm gear and bearings. The second type uses a worm gear with a sleeve for the first worm gear.
When choosing a gear reducer gearbox, it is essential to choose a high-quality unit. Improper gear selection can cause rapid wear of the worm gear. While worm gear reducer gearboxes are generally durable, their degree of wear depends on the selection and operating conditions. For example, overuse, improper assembly, or working in extreme conditions can lead to rapid wear.
Worm reducer gearboxes reduce speed and torque. Worm gears can be used to reduce the speed of rotating machines or inertial systems. Worm gears are a type of bevel gear, and their meshing surfaces have great sliding force. Because of this, worm gears can carry more weight than spur gears. They are also harder to manufacture. However, the high-quality design of the worm gear makes it an excellent choice for applications requiring high torque and high-speed rotation.
Worm gears can be manufactured using three types of gears. For large reduction ratios, the input and output gears are irreversible. However, the worm reducer gearbox can be constructed with multiple helices. The multi-start worm drive also minimizes braking effects.

Self-locking function

The worm reducer gearbox is self-locking to prevent the load from being driven back to the ground. The self-locking function is achieved by a worm that meshes with the rack and pinion. When the load reaches the highest position, the reverse signal is disabled. The non-locking subsystem back-drives the load to its original position, while the self-locking subsystem remains in its uppermost position.
The self-locking function of the worm reducer gearbox is a valuable mechanical feature. It helps prevent backing and saves the cost of the braking system. Additionally, self-locking worm gears can be used to lift and hold loads.
The self-locking worm gear reducer gearbox prevents the drive shaft from driving backward. It works with the axial force of the worm gear. A worm reducer gearbox with a self-locking function is a very efficient machine tool.
Worm gear reducer gearboxes can be made with two or four teeth. Single-ended worms have a single-tooth design, while double-ended worms have two threads on the cylindrical gear. A multi-boot worm can have up to four boots. Worm reducer gearboxes can use a variety of gear ratios, but the main advantage is their compact design. It has a larger load capacity than a cross-shaft helical gear mechanism.
The self-locking function of the worm reducer gearbox can also be used for gear sets that are not necessarily parallel to the shaft. It also prevents backward travel and allows forward travel. The self-locking function is achieved by a ratchet cam arranged around the gear member. It also enables selective coupling and decoupling between gear members.
worm reducer

high gear ratio

Worm reducer gearboxes are an easy and inexpensive way to increase gear ratios. These units consist of two worm gears – an input worm gear and an output worm gear. The input worm rotates perpendicular to the output worm gear, which also rotates perpendicular to itself. For example, a 5:1 worm gearbox requires 5 revolutions per worm gear, while a 60:1 worm gearbox requires 60 revolutions. However, this arrangement is prone to inefficiency since the worm gear experiences only sliding friction, not rolling friction.
High-reduction applications require many input revolutions to rotate the output gear. Conversely, low input speed applications suffer from the same friction issues, albeit with a different amount of friction. Worms that spin at low speeds require more energy to maintain their movement. Worm reducer gearboxes can be used in many types of systems, but only some are suitable for high-speed applications.
Worm gears are challenging to produce, but the envelope design is the best choice for applications requiring high precision, high efficiency, and minimal backlash. Envelope design involves modifying gear teeth and worm threads to improve surface contact. However, this type of worm gear is more expensive to manufacture.
Worm gear motors have lower initial meshing ratios than hypoid gear motors, which allows the use of smaller motors. So a 1 hp worm motor can achieve the same output as a 1/2 hp motor. A study by Agknx compared two different types of geared motors, comparing their power, torque, and gear ratio. The results show that the 1/2 HP hypoid gear motor is more efficient than the worm gear motor despite the same output.
Another advantage of the worm gear reducer gearbox is the low initial cost and high efficiency. It offers high ratios and high torque in a small package, making it ideal for low to medium-horsepower applications. Worm gear reducer gearboxes are also more shock-resistant.
China Nrv Aluminium Worm Gearbox with Extension Shaft     with Best Sales China Nrv Aluminium Worm Gearbox with Extension Shaft     with Best Sales
editor by czh 2023-02-02