ep

June 23, 2020

A vacuum pump is a device that gets rid of gas molecules from a sealed volume in order to keep behind a partial vacuum. The first vacuum pump was created in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity.

Vacuum Pumps, pressure pumps, cover an array of operating pressures. Laboratory/filtration vacuum pumps are for make use of in the lab or anywhere a minimal vacuum is needed; typically offer both vacuum and pressure capabilities. Use rough vacuum pumps (or roughing pumps) for laboratory and industrial applications requiring a level of vacuum less than 10-3 Torr. Make use of high vacuum pressure pumps when you need vacuums higher than 10-3 Torr. Also, consider the free-air capacity needed (the higher the free air capability, the faster it will evacuate the chamber) and whether you will need a lubricated (oiled) or non-lubricated (dried out or oilless) pump. Lubricated pumps provide higher capacities, higher vacuum amounts, and lower noise, but can contaminate the machine and require more maintenance.

Industrial Vacuum Pumps
Vacuum Pumps
Our selection of commercial vacuum pumps includes oil-less and oil-flooded choices. We can customize a pump to suit your specific needs and provide you with guidance with regards to deciding on the best pump for you. You may expect high-quality, long-lasting outcomes when you select Becker vacuum pumps.

100% Oil-less Vacuum Pumps
The Ever-power KVT3.60 – 3.140 series pumps are 100% oil-less rotary vane vacuum pumps designed to operate on a continuous basis at any point from atmospheric pressure to vacuum pressure level of 27” HgV (75 torr). These direct get units are given a high efficiency TEFC, C-encounter, flange mounted electric motor. Each of these pumps is equipped with an integral vacuum alleviation valve, a 5μ inlet filter, and vibration isolators as standard equipment.