ep

March 23, 2020

Worm get gearbox with motor
worm motor
A robust worm-travel gearbox powered by an MM28 electric motor. Ideal applications where a simple to fit, high torque productivity is required. Great for student based tasks which includes robots and buggies.
The unit has been designed so that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The engine is snap installed into its cradle to engage the gear and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small walking robots, lifting mechanisms, and additional applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to a few amps, making them ideal candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, even at very low voltages. We recommend that you utilize stall-detection sensors, or just look at your robot, to ensure that it doesn’t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on the smaller threaded end of the shaft, although it is not specifically intended to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical right angle worm geared motors arranged new standards for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly style offers easy integration right now and a truly future proof remedy. The Ever-Power gear motor offers total flexibility in mounting options includes shaft, base, encounter, and flange solutions. The motor terminal box could be mounted in choice positions rotated in 90º steps around the engine frame offering for unparalleled integration opportunities.
Ever-Power gear motors comply with UNITED STATES and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total remedy for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be used outside or in wet and dusty environments without the use of additional enclosures. Complete rated output is offered by the result shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the solution for applications requiring a part turn, optional dual result, or an inability for the engine to be back driven. The DC correct angle gear motors are designed for continuous and intermittent duty procedure. Our right angle gear reducers are designed with a number of mounting plate options, making them perfect for a variety of DC electric motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are created to generate high torque in a little package size. Worm Gear Motors are excellent for applications that want a personal- locking or breaking characteristic since the output shaft can’t rotate when there’s no power applied. Also, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision minimize gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Devices / Security Gates / Oral Chairs / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with one of our Worm Gearheads. EP Products will work with you to design and produce a Worm Gear Motor that will optimize the overall performance of your specific application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slice / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor uses a metal gear box for durability and a higher torque output. Because of the special mechanical framework of the worm get the electric motor output shaft is definitely self locking and may not be rotated.
This part runs on the two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and will attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially display their strength in applications where large gear ratios are necessary. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and efficient cleaning of the travel system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each of these has its unique requirements. The EP series worm equipment motors could be quickly and efficiently adapted to fulfill your needs.
Worm gear systems impress with their great power density and compact design. If required, we can also source them with the highly effective nsd tupH surface treatment.
In addition to the basic EP housing, you can expect an extensive type of bolt-on parts to customize the product including torque arms, shaft covers and output flanges. These could be easily field set up, but we will also be glad to assemble the average person components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear systems feature a smooth, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes this product preferably suited for severe and challenging industries like food processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or direct motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides several fixing possibilities and enable a simple assembling for the customer.
Additional drive configurationscan be created by use of built-on accessories (e.g. torque arm and output flanges). The housings are created in light weight construction out of aluminium die cast. Engine attachment is realised generally by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Motor – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm no load quickness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most suitable for applications where an easy to match, high torque end result is necessary, nylon housing and equipment, requires light oil or silicon grease lubrication, perfect for student based projects including robots and buggies.
Most ideal for applications where an easy to match, high torque end result is required
Perfect for student based projects including robots and buggies
Reversible Large torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Huge torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that’s, in the case of motor without electric, the end result axis is fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s electric motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. Why is worm gear so special? Check this wiki out: Worm Travel.
“Unlike with ordinary gear trains, the direction of transmission (insight shaft vs result shaft) isn’t reversible when working with large reduction ratios, because of the higher friction involved between your worm and worm-wheel, when usually a single start (a single spiral) worm is used. This is normally a advantage when it is desired to eliminate any possibility of the output driving the input.”
In other terms, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g