Precautions for the use of turbine box
The worm gear box should use lubricating oil to meet the requirements, and there should be no jamming and abnormal sound in the worm gear box cranking inspection, and there should be no looseness in the fastening of the connecting parts.
Second, the start of the worm gear box
The no-load test run of the worm gear box is to check whether the operation is stable, whether there is impact, vibration or abnormal noise; check whether the seal is leaking; the fasteners of the joints should not be loose; after the no-load test is qualified, carry out load work; run smoothly There shall be no shock, vibration and abnormal noise, and the current shall not exceed the rated value; check the bearing temperature, the temperature of the rolling bearing shall not exceed 70°C.
XNUMX. Maintenance and troubleshooting of worm gear box
Check whether the temperature of each bearing of the worm gear box exceeds the specified value; check the oil level and oil quality; often check the reducer for abnormal sound and vibration; check whether the fasteners are loose; check the sealing condition, and deal with it in time if any leakage is found.
Before the turbine box is used, check whether it is lubricated, because many mechanical equipment will wear out or even be damaged if the lubrication is not enough.Therefore, frequent lubrication is necessary.Also pay attention to whether there is noise and abnormality when using it.Frequent maintenance and inspection after use.If you need to buy a turbine box, welcome to inquire our Zhejiang turbine box manufacturer.