What are the reasons for the failure of the worm gear reducer?

  Worm gearbox is a very important part used in many mechanical equipment to help equipment decelerate.When using the worm gear reducer, some problems may arise. For these problems, we must figure out the reasons to solve them.Do you know what may cause problems with the worm gear reducer?Let us talk about the Zhejiang worm gear reducer manufacturer.

Worm gearbox

1. Because the sealing ring in the oil cylinder of the worm gear box is damaged, the pressure oil will enter the worm gear box body, which will cause the pressure in the oil filling hole on the top of the worm gear box, oil emission, etc., or the oil gauge will increase rapidly. .

2. Because the cross pin on the push rod of the worm gear box is broken and the clutch disc cannot be driven, the pressure oil output by the auxiliary pump can meet the requirements after measurement, but the knife cannot be cut or the paper cannot be cut.

3. The noise caused by the quality of the double vane pump itself and the lack of oil or damage to the bearing in the middle of the pulley cause abnormal noise when the machine is running dry.

4. Damage to the double blades will also cause air to appear in the pipeline frequently, causing the worm gear box to malfunction.

5. If there is a regular phenomenon of sliding blades in the cutting process, it can indicate that there is a problem with the worm gear box and it needs to be dealt with in time.

The above five problems are the reasons that our Zhejiang worm gear reducer manufacturers have summarized that may cause problems with the worm gear reducer.When you use the worm gear reducer, you must take relevant measures to deal with these problems to avoid malfunctions.We are a Zhejiang hydraulic cylinder manufacturer, selling Band saw accessorie, worm gear box reducer, worm gear box, if necessary, welcome to inquire.