Worm gearboxs are very popular among people in the industrial field. In order to improve their quality, they need to use reasonable materials. When operating, you should pay attention to the opening and closing directions of the operation should be closed clockwise, opening and closing the mortise and tenon of the operating end The size should be standardized, facing the ground, so that people can directly operate from the ground.So now let's talk about the matters that should be paid attention to when replacing the worm gear box filter element.
Before entering the dust filter element, the ash storage in the ash hopper must be cleaned, and the ash hopper must be fully ventilated to check that there is no harmful gas inside before starting to work.To enter the internal work of electrostatic precipitator, you must strictly implement the work ticket system, stop the electric field and its equipment, isolate the power supply, isolate the flue gas from passing, and the temperature of the precipitator drops below 40℃, the working part is reliably grounded, and reliable safety is established. Measures.The wind turbine worm gear box filter element has a large filtering area, high temperature resistance and corrosion resistance.It is applied to the characteristics of liquid with higher viscosity.
Its products are used in various hydraulic systems such as locomotives, industrial equipment, large hydraulic stations, and hydraulic pumps.The hydraulic filter element is directly installed in the oil tank, which simplifies the pipeline of the system, saves space, and makes the system more compact.When servicing the system, the oil in the tank will not flow back.When replacing the hydraulic filter element, the contaminants in the hydraulic filter element can be taken out of the oil tank together, so that the oil will not flow out.The oil return filter element has a bypass valve: when the hydraulic filter element is blocked by contaminants and the pressure difference reaches 0.35MPa, if the filter element cannot be replaced immediately, the bypass valve on the top of the filter element will be actively opened (the pressure difference is 0MPa) , In order to protect the normal operation of the system.With magnetic equipment: it can filter out ferromagnetic particles above 4LJm in the return oil.
The worm gear box filter element adopts the fiber filter method to make the dust easily fall into the dust container, and the back blow can peel off the viscous impurities sticking to the filter cartridge, so that it will not affect the dust removal efficiency of the filter cartridge, nor Will pollute the environment.Moreover, the service life of the filter cartridge is greatly increased.This indirectly saves expenses and saves energy.Under the influence of advanced technology and sophisticated manufacturing process, the dust removal filter element has the characteristics of corrosion resistance, pressure resistance, strong dirt holding capacity, high filtration accuracy, poor adsorption, low clogging probability, and strong moisture resistance.
